Paul Horn GmbH

Tooling system for machining of small bore holes:

• One toolholder can be used to clamp up to 1,200 different standard inserts.
• Boring out with bore diameter 0.2 mm and larger
• Grooving with bore diameter 2 mm and larger
• Axial grooving from min ext dia 5 mm

Chamfering, profiling, backboring and threading

Tool system bolted to the face side with low-vibration carbide toolholders

• Boring out with bore diameter 7.8 mm and larger
• Grooving with bore diameter 8 mm and larger

Large selection of inserts for various applications, e.g. chamfering, full radius, thread, backboring

Tool system for grooving, internal and external machining

• Internal machining: Bore diameter 18 mm and larger; groove width 0.5 mm to 5.3 mm; groove depth up to 4.7 mm
• External machining: Groove depth up to 4 mm; groove width 0.5 mm to 5.3 mm

Toolholder 245 and insert for corner relief

Tool system for sliding head/Swiss-type lathes for grooving, boring out, longitudinal turning, parting off and threading

• External machining: Groove width 1.5 mm to 3 mm; groove depth up to 16 mm

• Special geometries for steel and brass machining

Tool system for grooving, longitudinal turning, profiling and parting off

• Internal machining: Bore diameter 18 mm and larger; groove width 1.2 mm to 3.0 mm
• External machining: Groove depth up to 10 mm; groove width 1.2 mm to 3.0 mm

Tool system for grooving for internal and external machining and for parting off

• Internal machining: Bore diameter 28 mm and larger; groove width 2.0 mm to 6 mm
• External machining: Groove width 2.0 mm to 6.0 mm

Inserts available in geometries .3, .5, .A, .D, .NC, .K, .C, .E, .F, .H, .L

Tool system for grooving, internal and external machining and for parting off

• Internal machining: Bore diameter 38 mm and larger; groove width 3.0 mm to 10 mm
• External machining: Groove width 2.5 mm to 10.0 mm

Inserts available in geometries .3, .5, .A, .E, .F, .H, .L, .HR, .10, .20

Tool system for grooving, internal and external machining and for axial grooving

• Internal machining: Bore diameter 75 mm and larger; groove width 4.0 mm to 10 mm
• External machining: Groove width 2.5 mm to 10.0 mm

Inserts available in geometries .3, .10, .20

Tool system for grooving, internal and external machining and for parting off

• Internal machining: Bore diameter 46 mm and larger; groove width 1.9 mm to 5.3 mm
• External machining: Groove width 0.5 mm to 5.3 mm

Inserts available in geometries .F, .5, .D, .C

Tool system for grooving, internal and external machining

• Internal machining: Bore diameter 43 mm and larger; groove width 1.2 mm to 4.2 mm
• External machining: Groove width 1.2 mm to 4.2 mm

Large selection of inserts for various thread profiles. Trapezoidal threads, metric coarse pitch threads, metric fine pitch threads

• Tools for Swiss-type lathes
• Modular tools
• Axial grooving
• Form grooving S117
• Parting off