Paul Horn GmbH

Tool system for machining smaller bores:
More than 1,200 standard inserts can be clamped in a toolholder.

• Boring out from bore diameter 0.2 mm
• Grooving from bore diameter 2 mm
• Axial grooving from diameter 5 mm
• Chamfering, profiling, backboring and threading

Tool system bolted on face side with low vibration carbide toolholders

• Boring out from bore diameter 7.8 mm
• Grooving from bore diameter 8 mm

Large selection of inserts for different applications, e.g. chamfer, full radius, thread, backboring

Tool system for grooving for internal and external machining

• Internal machining: Bore diameter from 18 mm, groove width 0.5 mm to 5.3 mm; groove depth up to 4.7 mm

• External machining: Groove depth up to 4 mm; groove width 0.5 mm to 5.3 mm

Toolholder 245 and insert for corner reliefs

Tool system for Swiss-type lathes for grooving, boring out, longitudinal turning, parting off and threading

• External machining: Groove width 1.5 mm to 3 mm; groove depth up to 16 mm
• Special geometries for steel and brass machining

Tool system for grooving, longitudinal turning, profiling and parting off

• Internal machining: Bore diameter from 18 mm; groove width 1.2 mm to 3.0 mm
• External machining: Groove depth up to 10 mm; groove width 1.2 mm to 3.0 mm

Tool system for grooving for internal and external machining and for parting off

• Internal machining: Bore diameter from 28 mm; groove width 2,0 mm to 6 mm
• External machining: Groove width 2.0 mm to 6.0 mm

Inserts available in geometries .3, .5, .A, .D, .NC, .K, .C, .E, .F, .H, .L

Tool system for grooving, internal and external machining and for parting off

• Internal machining: Bore diameter from 38 mm; groove width 3.0 to 10.0 mm
• External machining: Groove width 2.5 mm to 10.0 mm

Inserts available in geometries .3, .5, .A, .E, .F, .H, .L, .HR, .10, .20

Tool system for grooving, internal and external machining and for axial grooving

• Internal machining: Bore diameter from 75 mm; groove width 4.0 mm to 10 mm
• External machining: Groove width 2.5 mm to 10.0 mm

Inserts available in geometries .3, .10, .20

Tool system for grooving, internal and external machining and for parting off

• Internal machining: Bore diameter from 46 mm; groove width 1.9 mm to 5.3 mm
• External machining: Groove width 0.5 mm to 5.3 mm

Inserts available in geometries .F, .5, .D, .C

Tool system for grooving for internal and external machining

• Internal machining: Bore diameter from 43 mm; groove width 1.2 mm to 4.2 mm
• External machining: Groove width 1.2 mm to 4.2 mm

Large selection of inserts for different thread profiles: Trapezoidal thread, metric standard thread, metric fine thread

• Tools for Swiss-type lathes
• Modular tools
• Axial grooving
• Profiling S117
• Parting off